Справочник Пользователя для Sony DCR-SR210E

You can dub images played back on your camcorder to other recording devices, such as 

VCRs or DVD/HDD recorders. Connect the device in either of the following ways.

Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for 

this operation (p. 13). Refer also to the instruction manuals supplied with the devices to be 

connected.

Select beforehand the media which contains the image you want to dub (p. 20).



 Since dubbing is performed via analog data transfer, the image quality may deteriorate.



 A/V connecting cable (supplied)

The Handycam Station has an A/V 

OUT jack (p. 102) and the camcorder 

has an A/V Remote Connector (p. 99). 

Connect the A/V connecting cable 

either to the Handycam Station or to 

your camcorder, according to your 

setup.

 A/V connecting cable with S VIDEO 

When connecting to another device 

via the S VIDEO jack, by using an A/V 

connecting cable with an S VIDEO 

cable (optional), higher quality images 

can be produced than with an A/V 

connecting cable. Connect the white 

and red plugs (left/right audio) and 

the S VIDEO plug (S VIDEO channel) 

of the A/V connecting cable with an 

S VIDEO cable (optional). The yellow 

plug connection is not necessary. 

Connecting only the S VIDEO plug will 

not output audio.

Device with an S 

VIDEO jack

Device without an 

S VIDEO jack

: Video/Signal flow

VCRs or DVD/HDD 

recorders

(Yellow)

(White)

(Red)

(White)

(Red)

(Yellow)

A/V OUT jack