Справочник Пользователя для Sony DSR-300K
Chapter 2 Fitting and Connections
Chapter 2 Fitting and Connections
39
WRR
WRR connector
CA-WR855
Fasten the screws (supplied with
the WRR-855A).
the WRR-855A).
Connecting to Audio System
The DSR-300/300P is able to record sound not only
from the microphone attached but also from a wireless
microphone or an external audio system.
from the microphone attached but also from a wireless
microphone or an external audio system.
Using a wireless microphone system
You can use the wireless microphone system
including a WRT-810A/830A UHF Wireless
Microphone and a WRR-810A/855A/860A UHF
Portable Tuner to record sound.
including a WRT-810A/830A UHF Wireless
Microphone and a WRR-810A/855A/860A UHF
Portable Tuner to record sound.
For details on using the wireless microphone system, see the
operating instructions for the microphone and tuner.
operating instructions for the microphone and tuner.
To connect a WRR-855A
1
Open the cover of the WRR
connector.
connector.
2
Insert the WRR-855A into the
CA-WR855.
CA-WR855.
3
Fit the attachment plate on the
rear side of the CA-WR855 to
the V-groove on the battery
attachment interface, and then
slide the CA-WR855 down
until it connects to the WRR
connector.
rear side of the CA-WR855 to
the V-groove on the battery
attachment interface, and then
slide the CA-WR855 down
until it connects to the WRR
connector.
4
Set one of the AUDIO IN (CH-
1/CH-2) switches to WRR.
1/CH-2) switches to WRR.