Инструкция для Sony DCR-TRV6
67
Editing
VIDEO
AUDIO
OUT
AUDIO/VIDEO
S VIDEO
TV
REC
4
PAUSE
S VIDEO
Recording video or TV programs
Using the A/V connecting cable
You can record a tape from another VCR or a TV program from a TV that has video/
audio outputs. Use your camcorder as a recorder.
audio outputs. Use your camcorder as a recorder.
(1) Insert a blank tape (or a tape you want to record over) into your camcorder. If
you are recording a tape from the VCR, insert a recorded tape into the VCR.
(2) Set the POWER switch to VCR on your camcorder.
(3) Set DISPLAY in
(3) Set DISPLAY in
to LCD in the menu settings (p. 85).
(4) Press z REC and the button on its right simultaneously on your camcorder,
then immediately press X on your camcorder.
(5) Press N on the VCR to start playback if you record a tape from a VCR. Select
a TV program if you record from a TV. The picture from a TV or VCR appears
on the LCD screen or in the viewfinder.
on the LCD screen or in the viewfinder.
(6) Press X on your camcorder at the scene where you want to start recording
from.
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
Using the Remote Commander
(DCR-TRV11/TRV20 only)
(DCR-TRV11/TRV20 only)
In step 4, press z REC and MARK simultaneously, then immediately press X. And in
step 6, press X at the scene where you want to start recording from.
step 6, press X at the scene where you want to start recording from.
: Signal flow