Руководство Пользователя для Sony DCR-TRV

You can make a recording with a stop-motion animated effect using frame recording.
To create this effect, alternately move the subject a little and make a frame recording.
We recommend that you use a tripod, and operate your camcorder using the Remote
Commander after step 4.

(1) In the standby mode, press MENU. Select FRAME REC in 

 with the SEL/

PUSH EXEC dial (p. 177).

(2) Select ON with the SEL/PUSH EXEC dial.
(3) Press MENU to erase the menu display.

The FRAME REC indicator lights up.

(4) Press START/STOP to start frame recording. Your camcorder makes a

recording for about six frames, and returns to recording standby.

(5) Move the subject, and repeat step 4.

Perform either of the following:
– Set FRAME REC to OFF in the menu settings.
– Set the POWER switch to other than CAMERA.

Note
The proper remaining tape is not indicated if you use the frame recording function
continuously.

When the POWER switch is set to MEMORY (except DCR-TRV16)
You cannot use the frame recording.

When using the frame recording function
The last recorded frame is longer than other frame.

CAMERA  SET
  SELFTIMER
  D  ZOOM
  PHOTO  REC
  16:9WIDE
  STEADYSHOT
  FRAME  REC
  INT. REC
    RETURN

ON

 [MENU] : END

CAMERA  SET
  SELFTIMER
  D  ZOOM
  PHOTO  REC
  16:9WIDE
  STEADYSHOT
  FRAME  REC
  INT. REC
    RETURN

OFF
ON

 [MENU] : END