Справочник Пользователя для Sony DCR-HC27E.
48
5
Start playing the cassette on the
VCR.
VCR.
The picture played on the connected
device appears on the LCD screen of
your camcorder.
device appears on the LCD screen of
your camcorder.
6
Touch [REC START] at the point
you want to start recording.
you want to start recording.
7
Stop recording.
Touch
(Stop) or [REC PAUSE].
8
Touch [
RET.]
t
.
Dubbing sound to a
recorded tape
recorded tape
You can add sound to a tape already
recorded in the 12-bit mode (p. 42) without
erasing the original sound.
recorded in the 12-bit mode (p. 42) without
erasing the original sound.
You can record audio by using the internal
stereo microphone.
stereo microphone.
• You cannot record additional audio:
– When the tape has been recorded in the 16-bit
mode (p. 42).
– When the tape has been recorded in the LP
mode.
– When your camcorder is connected via an
i.LINK cable.
– When the tape has been recorded in 4CH MIC
mode.
– On blank sections of the tape.
– When the tape has been recorded in a TV
– When the tape has been recorded in a TV
color system other than that of your
camcorder (p. 61).
camcorder (p. 61).
– When the write-protect tab of the cassette is
set to SAVE (p. 62).
– On sections recorded in HDV format.
• When you add sound, the picture will not be
output from the A/V OUT jack. Check the
picture on the LCD screen or the viewfinder.
picture on the LCD screen or the viewfinder.
Internal stereo
microphone
microphone
Recording pictures from a VCR,
etc. (Continued)
etc. (Continued)