Справочник Пользователя для Sony DCR-IP55E

C:21:00

• You are using a battery pack that is not an “InfoLITHIUM”

battery pack.

c Use an “InfoLITHIUM” battery pack (p. 263).

• Moisture condensation has occurred.

c Remove the cassette and leave your camcorder for at least

one hour to acclimatise (p. 270).

• The video heads are dirty.

c Clean the heads using the cleaning cassette (optional)

(p. 271).

• A malfunction other than the above that you can service has

occurred.*

c Remove the cassette and insert it again, then operate your

camcorder.

c Disconnect the mains lead of the AC adaptor or remove the

battery pack. After reconnecting the power source, operate
your camcorder.

• A malfunction that you cannot service has occurred.

c Contact your Sony dealer or local authorised Sony service

facility and inform them of the 5-digit code.
(example: E:61:10)

If you are unable to rectify the problem even if you try corrective actions a few times, contact your
Sony dealer or local authorised Sony service facility.

* Do not perform this operation if moisture starts to condense (p. 270).

Your camcorder has a self-diagnosis display
function.
This function displays the current condition of
your camcorder as a five-digit code (a combination
of a letter and figures) on the LCD screen. If a five-
digit code is displayed, check the following code
chart. The last two digits (indicated by ss) will
differ depending on the state of your camcorder.

C:21:ss

•C:ss:ss

You can service your camcorder
yourself.

•E:ss:ss

Contact your Sony dealer or local
authorised Sony facility.

E:20:ss
E:61:ss
E:62:ss

C:31:ss
C:32:ss

C:04:ss

C:22:ss