Справочник Пользователя для Sony DCR-IP1E
Getting started
E:\CX4800\revision2\SDL\updated1_final_Delivery\EU\GB.FR\3084862121DCR-IP1ECEE\01GB03PRE.fm
master:Right
Ge
ttin
g
ttin
g
sta
rte
d
15
DCR-IP1E
3-084-862-12(1)
A Battery charge level: Displays the
approximate remaining power of the
battery pack.
battery pack.
B Possible recording time.
Charging time
Approximate number of minutes required when
you fully charge a fully discharged battery pack
at 25°C (77°F). (10 – 30°C (50 – 86°F)
recommended.)
you fully charge a fully discharged battery pack
at 25°C (77°F). (10 – 30°C (50 – 86°F)
recommended.)
Recording time
Approximate number of minutes available
when you use a fully charged battery pack at
25°C (77°F).
when you use a fully charged battery pack at
25°C (77°F).
When the LCD BACKLIGHT is set to ON
When the LCD BACKLIGHT is set to OFF
* Approximate number of minutes when recording
while you repeatedly record, start/stop, set the
POWER switch to another mode, and zoom. The
actual battery life may be shorter.
POWER switch to another mode, and zoom. The
actual battery life may be shorter.
Playing time
Approximate number of minutes available
when you use a fully charged battery pack at
25°C (77°F).
when you use a fully charged battery pack at
25°C (77°F).
* With the LCD BACKLIGHT set to ON.
b
Notes
• The power will not be supplied from the battery pack
when the AC Adaptor is connected to the DC IN jack
of your camcorder, even if its mains lead is
disconnected from the wall socket.
of your camcorder, even if its mains lead is
disconnected from the wall socket.
• The recording and playback time will be shorter
when you use your camcorder in low temperature.
• The CHG (charge) lamp flashes during charging, or
the battery information will not be correctly
displayed in following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged. (For battery
displayed in following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is fully discharged. (For battery
information only.)
Using an outside power source
You can use the AC Adaptor as the power
source (mains) when you do not want the
battery to run out. While you are using the
AC Adaptor, the battery pack will not lose its
charge even when it is attached to your
camcorder.
source (mains) when you do not want the
battery to run out. While you are using the
AC Adaptor, the battery pack will not lose its
charge even when it is attached to your
camcorder.
PRECAUTION
Even if your camcorder is turned off, AC
power (mains) is still supplied to it while
connected to the wall socket via the AC
Adaptor.
power (mains) is still supplied to it while
connected to the wall socket via the AC
Adaptor.
Connect your camcorder as shown in
“Step 2: Charging the battery pack”
(p. 13).
“Step 2: Charging the battery pack”
(p. 13).
Battery pack
NP-FF50
120
NP-FF51 (supplied)
130
NP-FF70
150
NP-FF71
170
Battery pack Continuous
recording
time
time
Typical*
recording
time
recording
time
NP-FF50
75
40
NP-FF51
(supplied)
(supplied)
85
50
NP-FF70
160
95
NP-FF71
170
100
Battery pack Continuous
recording
time
time
Typical*
recording
time
recording
time
NP-FF50
75
40
NP-FF51
(supplied)
(supplied)
85
50
NP-FF70
165
95
NP-FF71
175
100
Battery pack
LCD panel opened*
NP-FF50
80
NP-FF51 (supplied)
90
NP-FF70
175
NP-FF71
190