Справочник Пользователя для Sony DCR-IP1E
Recording
E:\CX4800\revision2\SDL\updated1_final_Delivery\EU\GB.FR\3084862121DCR-IP1ECEE\01GB04REC.fm
master:Right
Re
cord
cord
ing
33
DCR-IP1E
3-084-862-12(1)
MENU, then select it from the
(PICT.
APPLI.) menu.
4
Touch the desired effect, then touch
.
5
Press START/STOP.
The fader indicator stops flashing and stays
lit up, then disappears when the fade is
complete.
lit up, then disappears when the fade is
complete.
To cancel the FADER
Follow steps 2 and 3, then touch [OFF] in step 4.
b
Note
• You cannot use FADER together with:
– Color Slow Shutter
– Digital effect
– Digital effect
Fading in from a still image on the
“Memory Stick Duo” — Memory
overlap
“Memory Stick Duo” — Memory
overlap
You can fade in from the still image on the
“Memory Stick Duo” to the movie currently
being recorded on the tape.
“Memory Stick Duo” to the movie currently
being recorded on the tape.
1
Check that you have a “Memory Stick
Duo” with the still image to be
superimposed and a tape in your
camcorder.
Duo” with the still image to be
superimposed and a tape in your
camcorder.
2
Slide the POWER switch to select the
CAMERA-TAPE mode.
CAMERA-TAPE mode.
3
Touch .
4
Touch MENU.
5
Select the
(PICT.APPLI.) menu,
then [
OVERLAP]
using /
,
then touch
.
The recorded still image on the “Memory
Stick Duo” appears on the thumbnail
screen.
Stick Duo” appears on the thumbnail
screen.
6
Touch
(previous) /
(next) to
select the still image to be superimposed.
7
Touch [ON], then
.
8
Touch .
9
Press START/STOP to start recording.
The [M.OVRLAP] indicator stops flashing
and stays lit up, then disappears when fade
is completed.
The [M.OVRLAP] indicator stops flashing
and stays lit up, then disappears when fade
is completed.
Using special effects
— Digital effect
You can add digital effects to the recordings.
[STILL] (still)
You can record a movie superimposing it on a
previously recorded still image.
previously recorded still image.
[FLASH] (flash motion)
You can record a movie with a serial-still-image
effect (Strobe effect).
effect (Strobe effect).
[LUMI.KEY] (luminance key)
You can replace a brighter area in a previously
recorded still image, such as the background of
recorded still image, such as the background of
0:00:00
FADER:
OFF
MONO-
TONE
OFF
MOSAIC
FADER
NORMAL
FADER
STBY
60min
0:00:00
P-MENU
NORMAL
FADER
STBY
60min
Still image
Movie
,
continued