Справочник Пользователя для Sony 930
7
Chapter 7 Location and Function of Parts and Controls
82
HDC-900/950/930 Series Product Information Manual
7-2.
HDC-950/930, HD Color Video Camera
7-2-1
Front Right Side
a
INCOM (intercom 1) button
The intercom 1 microphone is turned ON while this
button is pressed.
button is pressed.
b
RET 1 (return video 1) button
The return video 1 signal from the camera control unit
is monitored on the viewfinder screen while this button
is pressed. It is the same function as with the RET 1
buttons on the sides.
is monitored on the viewfinder screen while this button
is pressed. It is the same function as with the RET 1
buttons on the sides.
c
Y/RGB switch
Select the video signal output for the VF and TEST OUT
connectors.
connectors.
Y
: Output is the Y signal (this is the power-on default).
RGB
: Output is the component video signal(s)
selected by the R/G/B switch.
d
R/G/B (red/green/blue) switch
When the Y/RGB switch is set to RGB, select the
component video signal(s) to be provided as output to
the VF and TEST OUT connectors.
component video signal(s) to be provided as output to
the VF and TEST OUT connectors.
e
ASSINABLE switch
You can assign a function using the OPERATION
menu.
menu.
f
FILTER (internal filter selection) control
Used to select an internal filter appropriate for the light
source illuminating the subject.
source illuminating the subject.
g
AUTO W/B BAL (white and black balance
automatic adjustment) switch1)
automatic adjustment) switch1)
Used to automatically adjust white and black balance.
WHT
: Automatically adjust white balance.
BLK
: Automatically adjust black balance.
h
CAMERA/VTR (switch1)
Used to select control signals sent to a VTR connected
to the camera. The operation of the VTR at the start of
recording for each setting is shown in the table below.
to the camera. The operation of the VTR at the start of
recording for each setting is shown in the table below.
i
GAIN (switch1)
Used to select the gain of the video amplifier based on
lighting conditions. The gain values for the L, M, and H
settings may be set using the menus. When shipped
lighting conditions. The gain values for the L, M, and H
settings may be set using the menus. When shipped
qf
MENU SEL knob/
ENTER button
1
INCOM button
2
RET 1 button
3
Y/RGB switch
4
R/G/B switch
5
ASSINABLE switch
6
FILTER control
7
AUTO W/B BAL switch
8
CAMERA/VTR switch
9
GAIN switch
q;
OUTPUT/AUTO
KNEE switch
qa
WHITE BAL switch
qs
DISPLAY switch
qd
CANCEL/STATUS switch
ND filter
Color temperature
conversion filter
1
Clear
A
Cross filter
2
1/4ND
B
3200K
3
1/8ND
C
4200K
4
1/16ND
D
6300K
5
1/64ND
E
8400K
CAMERA
VTR
Function
OFF
SAVE
Turn off the camera power.
ON
SAVE
Camera power is on. When
the VTR START button is
pressed, recording will begin
after a few seconds.
the VTR START button is
pressed, recording will begin
after a few seconds.
ON
STBY
Turn on the camera power.
When the VTR START button
is pressed, recording will
begin immediately.
When the VTR START button
is pressed, recording will
begin immediately.