Справочник Пользователя для Panasonic KX-TVP200

150

Installation Manual

To create a password or change an existing password:

a) Type [1] or [2]

 Note

 When you press [2] to change the System Reset/Clear password, you should
 type the current (OLD) password before entering a new one.

b) Type the password.

c) Type the password again for verification.

To clear a password:

a) Type [1] or [2].

b) Press ENTER. Do not type a password on this screen.

c) Press ENTER. Do not type a password on this screen.

 Note

 The password entered on the screen will not appear. The VPS does not
 distinguish capitals from lower cases.

Use the TIME command to set the system date and time. A number of system functions require 
that the system time and date be set correctly. These functions include message waiting 
notification, external message delivery, call-retries-after initial-failure-to-connect, and 
automatic deletion of messages.

Time Synchronisation: If you have DPT Integration between the VPS and your PBX (latest 
software version), the date and time are automatically sent from the PBX to the VPS whenever 
the PBX sets the date and time. Also, this transfer occurs whenever DPT Integration is 
established.

Type TIME, then Press RETURN.

Type the current time.

Maximum 10 characters
NEW PASSWORD : =

VERIFICATION: =

Maximum 10 characters
NEW PASSWORD : =

VERIFICATION : =

$  TIME
Current time is 12:34, PM
              Enter new time (HH:MM, AM/PM) : =

Current date is MON 1-JAN-2001
   Enter new date (DD-MM-YY) : =