Справочник Пользователя для Lucent Technologies 555-670-111

Скачать
Страница из 1082
MERLIN LEGEND Communications System Release 7.0
System Programming  
555-670-111  
Issue 1
April 1999
Glossary 
GL-22
 
P
Parity 
Addition of a 
bit to a bit string so that the total number of 
ones is odd or even; used to detect and correct 
transmission errors.
PassageWay 
Direct Connection 
Solution
Set of software applications that provides an interface 
between a personal computer and an MLX telephone.
PBX 
Private Branch Exchange. Local electronic telephone 
switch that serves local stations (for example, extensions 
within a business) and provides them with access to the 
public network.
PC
Personal Computer.
PCMCIA Memory 
Card
Personal Computer Memory Card International Association 
Memory Card. See 
.
Peripheral System
In a 
private network, system that does not connect to more 
than one other system, sometimes called an “end node.”
Personal Line 
Central office line/trunk that terminates directly at one or 
more extensions. In 
Hybrid/PBX mode, a personal line 
cannot be part of a line/trunk 
pool. Also called “DFT” (Direct 
Facility Termination).
PFT 
Power Failure Transfer. Feature that provides continuity of 
telephone service during a commercial power failure by 
switching some of the system’s line/trunk connections to 
telephones connected to specially designated extension 
jacks.
Phantom 
Extension
Extension that is not actually plugged into the system, but 
is used, for example, as a calling group member covered 
by a 
voice messaging system.
Pool 
In 
Hybrid/PBX mode, a group of outside lines/trunks that 
users can access with a Pool button or by dialing an access 
code on an SA
 button. Also used by the ARS feature when 
choosing the least expensive route for a call.
Point-to-Point 
Facility
In a 
private network, a line/trunk that passes through the 
PSTN without using the switching capabilities of the PSTN.
Port 
Se
. Also, refers to 
extension or line/trunk jacks 
before these are numbered according to the 
dial plan 
during programming. The lowest jack on a module is 
always Port 1.
Power Failure 
Transfer
Se
.
Power Supply 
Module
Device that directs electricity to modules and telephones on 
the system. One power supply module is needed for each 
carrier, and an 
auxiliary power unit is added, if needed.