Справочник Пользователя для Pella V981553

Installation Instructions for Typical Wood Frame Construction.
These instructions were developed and tested for use with typical wood frame wall construction in 
a wall system designed to manage water. These instructions are not to be used with any other 
construction method. Installation instructions for use with other construction methods or multiple 
units may be obtained from Pella Corporation or local Pella retailer. Building designs, construction 
methods, building materials, and site conditions unique to your project may require an installation 
method different from these instructions and additional care. Determining the appropriate installation 
method is the responsibility of you, your architect, or construction professional. 
Handling and Storage: Provide full support under the framework while storing, moving and installing 
the product. DO NOT lift the product by the head member only. Remove the plastic shipping material 
prior to storing or installing the product. DO NOT store in direct sunlight. Allow sufficient spacing 
between products for ventilation.

4JMM'MBTIJOH5BQF

4JMM'MBTIJOH5BQF

8BUFS

3FTJTUJWF

#BSSJFS

4IFBUIJOH

'SBNJOH

4JMM

5PQ

'MBTIJOH

5BQF

/BJMJOH'JO

)FBE

4JEF

'MBTIJOH

5BQF

4JEF'MBTIJOH5BQF

$PSOFS

'MBTIJOH

5BQF

8PPE#MPDLJOH

$PSOFS

'MBTIJOH

5BQF

YOU WILL NEED TO SUPPLY:

TOOLS REQUIRED:

• Cedar or Impervious shims/spacers (12 to 20)
• 2" galvanized roofing nails (1/4 to 1/2 lb.)
• Closed cell foam backer rod/sealant backer (12 to 30 ft.)
• Pella

®

 SmartFlash

™

 foil backed butyl window and 

  door flashing tape or equivalent
• High quality exterior grade polyurethane or 
  silicone sealant (2 to 3 tubes per door)
• Great Stuff 

™

 Window and Door Insulating Foam Sealant by the 

   Dow Chemical Company or equivalent low pressure polyurethane 
   window and door foam - DO NOT use high pressure or latex foams.
• Wood blocking for sill
• Optional stainless steel screws and anchors for installation on  

concrete floor.

For High Performance Applications:
• #8 x 1-1/2" corrosion resistant Phillips pan head screws (75 to 100)
• #8 x 3/4" outside diameter corrosion resistant flat washers (75 to 100)

• Tape measure

• 2' or 4' Level

• Square

• Hammer

• Stapler

• Sealant gun

• Scissors or utility knife

• Screwdrivers (#2 Phillips with 

8" shaft and small flat blade)

• Drill

SEALANT

SEALANT

Always read the Vinyl Window and Door Limited Warranty before purchasing 
or installing Vinyl Windows and Doors manufactured by Pella Corporation. By 

installing this product, you are acknowledging that this Limited Warranty is part of the terms of the 
sale. Failure to comply with all Pella installation and maintenance instructions may void your Pella 
product warranty. See Limited Warranty for complete details at http://warranty.pella.com.

Part Number: V981553

©2009 Pella Corporation