Справочник Пользователя для Mitsubishi Electronics fx3u

5 - 13

MELSEC-F

COMMUNICATION PROCEDURE

5

5 - 13

5.3 Router Relay Parameter

This section explains the router relay parameter.

NOTE

When making settings with the FX Configurator-EN-L, select [Router Relay 
Parameters] from the initial screen and adjust the settings at the [Ethernet Router 
Relay Parameter Settings] screen.

(1) Router relay function (BFM#2 b4,b5)

(a) Set whether the router relay function will be used or not.

The router relay function is not needed when communicating with the target 
device on the same Ethernet network (the subnet address of the IP address 
is the same).

(b) The router relay function allows communication with devices on other 

Ethernet networks via routers and gateways.
(The router relay function does not mean a function to act as a router.)

(c) One router can be set for the router relay function.

Setting item name

BFM number [Decimal]

Description of setting

Setting range/options

Router relay function

2

(b4, b5)

Select whether the router relay function is not used or is used.

00 : Use
01 : Not used

Sub-net mask pattern

512, 513

Set the sub-net mask.

C0000000 to FFFFFFFC

H

Router IP address

514, 515

Set the IP address of the router to be routed through.

Other than 00000000

H

 and FFFFFFFF

H