Справочник Пользователя для Regency P33-LP4

Regency

®

 P33-4 Zero Clearance Direct Vent Gas Fireplace

44

1)  Open the bottom louvers.

2)  Loosen the thermocouple or thermopile with 

a 7/16" wrench.

3)  Disconnect thermocouple by loosening 

nut from the valve with a 9mm wrench. 
Disconnect thermopile by loosening 2 
screws marked TP on the valve.

4)  Drop the thermocouple or thermopile down 

from the bracket and pull it out of the unit.

5)  Reinstall the new ones in reverse order.

 
If the glass gasket requires replacement use 
5/8" fl at glass gasket for the Bay Front (Part 
# 936-243) and a tadpole glass gasket for the 
Flush Front (Part # 936-155). 

Your Regency

®

 fi replace is supplied with high 

temperature, 5 mm Neoceram ceramic glass that 
will withstand the highest heat that your unit will 
produce.   If your glass requires cleaning, we 
recommend using an approved glass cleaner 
available at all authorized dealers. Do not use 
abrasive materials. Do not clean the glass 
when hot.

In the event that you break your glass by impact, 
purchase your replacement from an authorized 
Regency

®

 dealer only, and follow our step-by-

step instructions for replacement.

Remove the fl ush door front. Remove the 4 
glass clips from each corner. Slide in the new 
replacement glass. Push the 4 glass clips 
back onto the frame.  The glass must have 
gasketing around it.

1)  Remove the door from the unit and place 

on a soft surface to prevent scratching.

2)  Remove the nuts holding the glass clips 

in place and remove.

3)   Replace the glass. The glass must have 

5)  Reverse the previous steps, replace the 

glass clips and fasten with the nuts but 
do not over tighten, as this can break the 
glass.

6)  Replace door on the Fireplace and check 

the seal.