Справочник Пользователя для Samsung MH026FPEA

E-

15

ENGLISH

◆ Heating temperature
◆ Fan speed when heating

If necessary, press the       (On/Off) button.

Result:

◆

The operation indicator on the indoor unit lights up.

◆

The air conditioner starts up in the mode selected 

when the unit was last used.

◆

The indoor unit beeps.

The air conditioner is fitted with a protection mechanism
to prevent the unit from being damaged when it is started
immediately after being:

◆

Plugged in

◆

Stopped

It will start up normally after three minutes.

If the        is not displayed at the top of the remote control, press the  

button on the remote control one or more times until it appears.

Result:

◆

The indoor unit beeps each time you press the

button.

◆

The air conditioner runs in HEAT mode.

You can change modes at any time.

To adjust the temperature, press the

button one or more times

until the required temperature is displayed.

Possible temperatures are between 16°C and 30°C inclusive.

Result:

◆

Each time you press the

button: 

- The temperature is adjusted by 1°C
- The indoor unit beeps

◆

The air conditioner starts heating, provided that the room 

temperature is lower than the desired temperature

(selected temperature+3°C).

◆

If the room temperature reaches the set temperature, the air
conditioner stops heating, but the fan is still operating.

Select the fan speed by pressing the

button one or more times

until the required setting is displayed:

Automatic (rotated :                                               ) 

Low

Medium

High

Result:

◆

Each time you press the

button, the indoor unit beeps.

◆

For the first 3 to 5 minutes, the fan operates very 

slowly until the air has been sufficiently warmed. Once the 
correct temperature has been reached, the fan is automatically 
set to the required speed.

To control the direction of the air flow, refer to page 19.