Справочник Пользователя для Heatiator BCDV36

Скачать
Страница из 28
01-03
17
33606 Rev D
BUILDER'S CHOICE SERIES INSTALLATION INSTRUCTIONS
I. FINISHING
1. COMBUSTIBLE  FINISHING  MATERIAL
Materials made of or surfaced with wood, compressed
paper, plant fibers, plastics, or any material capable of
igniting  and  burning,  whether  flame  proofed  or  not,
plastered  or  unplastered  (this  includes  drywall)  are
considered  to  be  combustible.
2. NONCOMBUSTIBLE  FINISHING  MATE-
RIAL
Material which will not ignite and burn. Such materials
are  those  consisting  entirely  of  steel,  iron,  brick,  tile,
concrete,  slate,  glass  or  plasters,  or  combination
thereof, or have a UL Fire rating of Zero (0).
3. HIGH TEMPERATURE SEALANT MATE-
RIAL
Sealants that will withstand high temperatures: General
Electric  RTV103  (Black)  or  equivalent;  Rutland,  Inc.
Appliance Mortar #63 or equivalent.
A high temperature sealant, 1/8” wide minimum, must
be used to close off gaps between the appliance and
facing to prevent cold air leaks. See Figure 28.
Figure 28
Finishing Materials
4. ATTACHING  THE  HOOD
The hood must be attached or a fire hazard may result.
Simply  slide  the  hood  under  the  three  screws  above
the appliance opening. See Figure 29.
5. GLASS AND SCREEN REMOVAL
See page 22 of this manual.
Figure 29
Hood Placement
WARNING!
Grilles and hoods on this appliance cannot, in any
way, be covered as it may create a fire hazard.