Справочник Пользователя для Insignia 29400403A
16
Insignia NS-HTIB51A 5.1 Channel Home Theater System
www.insigniaproducts.com
• Using the remote control, press TUNER
repeatedly to select AM or FM, then press
D.TUN.
D.TUN.
• Within eight seconds, press the number
buttons to enter the frequency of the radio
station you want. For example, to tune to
87.50, press 8, 7, then 5.
station you want. For example, to tune to
87.50, press 8, 7, then 5.
Presetting FM or AM stations
You can store a combination of as many as 40 of
your favorite AM or FM stations as presets.
your favorite AM or FM stations as presets.
To store a station as a preset:
1 Tune to the FM or AM station that you want to
store as a preset. See “Listening to the radio” on
page 15 for information on tuning your receiver.
page 15 for information on tuning your receiver.
2 Press MEMORY. The preset number flashes.
3 While the preset number is flashing (about eight
seconds), press PRESET
or
to select a
preset number from one through 40.
4 Press MEMORY again to store the station or
channel. The station or channel is stored and the
preset number stops flashing.
preset number stops flashing.
5 Repeat steps 1 through 4 to preset your favorite
radio stations.
Tuning to a preset station
To tune to a preset station:
• To select a preset, press PRESET
or
on
the receiver, or press CH +/– on the remote
control.
control.
Deleting preset stations
To delete a preset station:
1 Select the preset you want to delete.
2 Press TUNING MODE while pressing and
holding MEMORY. The preset is deleted and its
number disappears from the display.
number disappears from the display.
Using the listening modes
The receiver’s listening modes can transform your
listening room into a movie theater or concert hall,
with high fidelity and stunning surround sound.
listening room into a movie theater or concert hall,
with high fidelity and stunning surround sound.
The following audio formats are supported by the
listening modes:
• MONO–This is mono (monophonic) sound. All the
listening modes:
• MONO–This is mono (monophonic) sound. All the
audio signals are mixed and reproduced through
a single speaker.
a single speaker.
• STEREO–This is stereo (stereophonic) sound. Two
independent audio signal channels are
reproduced through two speakers.
reproduced through two speakers.
• 5.1ch–This is 5.1-channel surround sound. This
surround system has five main channels of sound
and a sixth subwoofer channel (called the
point-one channel).
and a sixth subwoofer channel (called the
point-one channel).
• 7.1ch–This is 7.1-channel surround sound. This is
a further sound enhancement to 5.1 channel
sound with two additional speakers that provide
greater sound envelopment and more accurate
positioning of sounds. The receiver outputs this
source in 5.1-channel surround sound.
sound with two additional speakers that provide
greater sound envelopment and more accurate
positioning of sounds. The receiver outputs this
source in 5.1-channel surround sound.
Selecting a listening mode
To select a listening mode:
• Press one of the following buttons. If you are
• Press one of the following buttons. If you are
using the remote control, press the RECEIVER
button first. See “Listening modes” on page 17,
and “Insignia-Original Listening Modes” on page
18 for information on listening modes.
button first. See “Listening modes” on page 17,
and “Insignia-Original Listening Modes” on page
18 for information on listening modes.
• MOVIE/TV–This button selects the listening
modes intended for use with movies and TV.
• MUSIC–This button selects the listening
modes intended for use with music.
• GAME–This button selects the listening
modes intended for use with video games.
• STEREO–This button selects the Stereo
listening mode and All Channel Stereo
listening mode.
listening mode.
Tip
You can also press the number buttons on the
remote control to select a preset station directly.
remote control to select a preset station directly.
Notes
•
You can only select the Dolby Digital and DTS
listening modes if your Blu-ray Disc/DVD player
is connected to the receiver with a digital audio
connection (coaxial, optical, or HDMI).
listening modes if your Blu-ray Disc/DVD player
is connected to the receiver with a digital audio
connection (coaxial, optical, or HDMI).
•
The listening mode you can select depends on
the format of the input signal. To check the
format, see “Displaying source information” on
page 14.
the format of the input signal. To check the
format, see “Displaying source information” on
page 14.
•
You can only select Mono, Direct, and Stereo
listening modes with a pair of headphones is
connected.
listening modes with a pair of headphones is
connected.
•
Listening modes cannot be selected while a pair
of headphones is connected.
of headphones is connected.
NS-HTIB51A_10-0114_MAN_.book Page 16 Tuesday, April 13, 2010 10:19 AM