Справочник Пользователя для Insignia NS-AV511

Скачать
Страница из 38
5
Insignia NS-AV511 Surround Sound Receiver
www.insigniaproducts.com
Setting up your home 
theater system
Finding a location for your home theater 
system
• Install your home theater system on a stable flat 
surface. Position your receiver so that it has a 
direct line of sight to the remote control.
• Do not expose your system to extremes of 
temperature or humidity.
• Avoid placing your system on a hot surface such 
as on top of other hot running equipment. Make 
sure that there is adequate ventilation to your 
system.
Placing your speakers
1 - Center speaker
This speaker enhances the front speakers, making 
sound movements distinct and providing a 
full-sound image. In movies it is used mainly for 
dialog. Position it close to your TV facing forward at 
about ear level, or at the same height as the front 
speakers.
2 - Front speakers
These provide the overall sound. Their role in a 
home theater system is to provide a solid anchor for 
the sound image. They should be positioned facing 
the listener at about ear level, and equidistant from 
the TV. Angle them inward so as to create a triangle, 
with the listener at the apex.
3 - Subwoofer
The subwoofer handles the bass sounds of the LFE 
(Low-Frequency Effects) channel. The volume and 
quality of the bass output from your subwoofer 
depends on its position, the shape of your listening 
room, and your listening position. In general, a 
good bass sound can be obtained by installing the 
subwoofer in a front corner, or at one-third the 
width of the wall, as shown.
4 - Surround speakers
These speakers are used for precise sound 
positioning and to add realistic ambience. Position 
them at the sides of the listener, or slightly behind, 
about two to three feet (60 to 100 cm) above ear 
level. Ideally they should be equidistant from the 
listener.
Speaker precautions
• Do not put water or other liquids close to the 
speakers. If liquid is spilled on the speakers, they 
may be damaged.
6
D.TUN
DIMMER
In tuner mode, press D.TUN, then the 
number buttons to tune directly to a 
frequency.
Press DIMMER to adjust the brightness of 
the display.
7
DISPLAY button
Press repeatedly to cycle through the 
available input source information.
8
RECEIVER button
Press to control the receiver.
9
MUTING button
Press to mute the sound output from the 
receiver.
10
TUN MODE
 
button
Press to toggle between auto and manual 
tuning modes.
11
VOL 
/
 buttons
Press to increase or decrease the sound 
volume.
12
CH +/– buttons
ALBUM
In tuner mode, press to go to the next or 
previous preset channel.
13
RETURN button
In menu mode, press to return to the main 
menu or previous menu.
14
HOME button
Press to access audio settings. See 
“Changing audio settings” on page 23.
15
Number buttons
Press to enter a preset number or to 
manually tune the radio.
16
SLEEP/CLR button
Press repeatedly to select the sleep timer 
duration.
In menu mode, press to clear an entry.
Caution
Do not install the receiver in a confined space such as 
a bookcase.
Caution
Connect the AC cord only after the speakers, 
antenna, and all optional equipment have been 
connected. Never make or change any 
connections with the power turned on.
Item Description
Function
Tip
To find the best position for your subwoofer, while 
playing a movie or some music with good bass, 
experiment by placing your subwoofer at various 
positions within the room, and choose the one that 
provides the most satisfying results.
NS-AV511_11-0201_MAN_.book  Page 5  Wednesday, April 13, 2011  9:31 AM