Справочник Пользователя для Philips AZ122

The music compression technology MP3
(MPEG1 Audio Layer 3) significantly reduce
the digital data of an audio CD while 
maintaining CD quality sound.

you can either download

legal music files from the internet to your
computer hard disc, or create such files by
converting audio CD files in your computer
through appropriate encoder software.
(128kbps bit rate or higher is recommended
for MP3 files.)

burn the music files

from your computer hard disc on a CDR or
CDRW using your CD burner.

This player plays Audio Discs including CD-R/
CD-RW, and MP3 CD. Do not try to play a
CD-ROM, CD-I, CDV,VCD, DVD or 
computer CD.

CDs encoded with copyright protection
technologies by some record companies may
be unplayable by this product.

For a disc with CD Audio tracks and MP3 files,
only the CD Audio tracks will be played

Adjust the source selector to CD/MP3.
➜ Display: - - - appears.

To open the disc door, lift the disc door at
the edge marked LIFT TO  OPEN.

Insert a disc with the printed side facing up
and press the disc door gently close.

➜ Display:The total number of tracks

appears.

Press 

2; to start playback.

➜ Display:

2 and the current track number.

For MP3-CD only:
➜ The current track number “

XXX“ and

album number “ALBUM

XXX“ will be 

displayed interchangeably. (See 2 3)

To pause playback press 

2;.

➜ Display:

2 flashes.

Press 

2; again to resume playback.

To stop playback, press 

9.

The disc playback will also stop when:
–

you open the disc compartment;

–

you select RADIO or TAPE sound source;

–

the disc has reached the end of the playback.

•

Press

∞ or § once or repeatedly until the

desired track number appears in the display.

For MP3-CD: First press ALBUM + (up)
once or more to find your album.

•

In the pause/stop position, press

2; to start

playback.

During playback, press and hold down 
∞ or §.
➜ The disc is played at high speed and low

volume.

When you recognize the passage you want
release 

∞ or §.

➜ Normal playback resumes.

–

When your searching reaches the end of the
last track, the disc playback stops.

You may store up to 20 tracks (for MP3-CD:
10 tracks) in the desired sequence. If you like,
store any track more than once.

In the stop position, press PROG to start
programming.
➜ Display shows P01 indicating the start of

the program. PROG flashes. (See 4)

Press 

∞ or § to select your desired track

number.

For MP3-CD: first press ALBUM + once
or more to find your album.

Press PROG to store the desired track.
➜ Display shows P02 (up to 20 or 10 

in sequence), indicating the next program
location available.

Repeat steps 2 to 3 to select and store all
desired tracks.

Press 

2; to play the program.

To review your program
In the stop position, press and hold PROG 2
seconds.
➜ The display shows all the stored tracks in
sequence.

–

Display shows P01 if  no track is 
programmed

–

If you try to store more than 20 tracks (for
MP3-CD: 10 tracks), no track can be selected
and the display will show P--.

You can erase a program by:
– pressing 

9 (twice during playback or once

in the stop position);

– selecting RADIO or TAPE sound source;
– opening the disc door;
➜ Display: PROG disappears.

5

,

6)

You can select and change the various play
modes before or during playback, and 
combine REPEAT modes with PROG.

REP – plays the current track continuously.

REP ALL – plays the entire disc/program
continuously.

SHUF – plays all tracks in random order.

To select play modes, press MODE once or
more.

Press

2; to start playback if in the stop 

position.

To select normal playback, press MODE
repeatedly until the various modes are no
longer displayed.
– You can also press

9 to cancel your play

modes.