Справочник Пользователя для Integra DTR-10.5
100
Listening Mode Setup
—Continued
Re-EQ On:
Adjusts the soundtrack in which the treble
is overemphasized, so that the sound is optimized for
home theater.
home theater.
Academy On:
Lowers the treble level and filters the
noise when the source contains emphasized treble
sound and too much hiss, such as an old mono audio
movie recorded onto videotape.
sound and too much hiss, such as an old mono audio
movie recorded onto videotape.
b. Multiplex Input Channel
This option allows you to select the preferred audio
channel when the input is the AAC/Dolby Digital sound
multiplex signal. This option can also be set for Zone 2.
The input channel setting made here will be applied to
all the listening modes for the Dolby Digital and AAC
input signal “1+1” sources.
channel when the input is the AAC/Dolby Digital sound
multiplex signal. This option can also be set for Zone 2.
The input channel setting made here will be applied to
all the listening modes for the Dolby Digital and AAC
input signal “1+1” sources.
Main (Default):
The main channel is preferred for
output.
Sub:
The sub-channel is preferred for output.
Main+Sub:
The main and sub-channel are output.
c. Output Speaker
This option configures the speakers to use when playing
the source in the D.F. Multiplex listening mode. Select
the speaker terminals to which the speakers you want to
use are connected.
the source in the D.F. Multiplex listening mode. Select
the speaker terminals to which the speakers you want to
use are connected.
Center A:
Outputs the source only from the speaker
connected to the CENTER SPEAKERS A terminal.
Center B:
Outputs the source only from the speaker
connected to the CENTER SPEAKERS B terminal.
Center A+B:
Outputs the source from the speakers
connected to the CENTER SPEAKERS A and
CENTER SPEAKERS B terminals.
CENTER SPEAKERS B terminals.
Front L/R A (Default):
Outputs the source from the
speakers connected to the FRONT L/R SPEAKERS A
terminals.
terminals.
Front L/R B:
Outputs the source from the speakers
connected to the FRONT L/R SPEAKERS B terminals.
Front L/R A+B:
Outputs the source from the speakers
connected to the FRONT L/R SPEAKERS A and
FRONT L/R SPEAKERS B terminals. Note that this
option is not available when the front speakers are in Bi-
amp or in BTL configuration.
• When the “(Speaker B) Front L/R” is set to an option
FRONT L/R SPEAKERS B terminals. Note that this
option is not available when the front speakers are in Bi-
amp or in BTL configuration.
• When the “(Speaker B) Front L/R” is set to an option
other than “Main A” in the Speaker Configuration
sub-menu, the available options will be “Center A,”
“Center B,” “Center A+B,” and “Front L/R A.”
sub-menu, the available options will be “Center A,”
“Center B,” “Center A+B,” and “Front L/R A.”
• When the “(Speaker A) Center” is set to “Not Used” in
the Speaker Configuration sub-menu, the available
options will be “Front L/R A,” “Front L/R B,” and
“Front L/R A+B.” In this case, the default setting is
“Front L/R A.”
options will be “Front L/R A,” “Front L/R B,” and
“Front L/R A+B.” In this case, the default setting is
“Front L/R A.”
• When the “(Speaker B) Center” is set to an option
other than “Main A” in the Speaker Configuration
sub-menu, the available options will be “Center A,”
“Front L/R A,” “Front L/R B,” and “Front L/R A+B.”
sub-menu, the available options will be “Center A,”
“Front L/R A,” “Front L/R B,” and “Front L/R A+B.”
• When the impedance setting for either “Front L/R A”
or “Front L/R B” in the Speaker Impedance sub-menu
is set to “6 ohms” or “4 ohms,” “Front L/R A+B”
is set to “6 ohms” or “4 ohms,” “Front L/R A+B”
cannot be selected. Similarly, when the impedance
setting for either “Center A” or “Center B” in the
Speaker Impedance sub-menu is set to “6 ohms” or “4
ohms,” “Center A+B” cannot be selected.
setting for either “Center A” or “Center B” in the
Speaker Impedance sub-menu is set to “6 ohms” or “4
ohms,” “Center A+B” cannot be selected.
• When the “(Speaker A) Center” is set to “Not Used”
and the “(Speaker B) Front L/R” is set to an option
other than “Main A” in the Speaker Configuration
sub-menu, this setting will not be displayed.
other than “Main A” in the Speaker Configuration
sub-menu, this setting will not be displayed.
d. Subwoofer
This option configures the subwoofer to use when
playing the source in the D.F. Multiplex listening mode.
Select the terminal to which the subwoofer you want to
use is connected. This setting can be made when the
“(Speaker A) Subwoofer” is set to an option other than
“Not Used” in the Speaker Configuration sub-menu.
However, when the “(Speaker B) Subwoofer” is set to
an option other than “Main A” in the Speaker
Configuration sub-menu, the available options will be
“A” or “Not Used.”
playing the source in the D.F. Multiplex listening mode.
Select the terminal to which the subwoofer you want to
use is connected. This setting can be made when the
“(Speaker A) Subwoofer” is set to an option other than
“Not Used” in the Speaker Configuration sub-menu.
However, when the “(Speaker B) Subwoofer” is set to
an option other than “Main A” in the Speaker
Configuration sub-menu, the available options will be
“A” or “Not Used.”
A (Default):
Outputs the source only from the
subwoofer connected to the SUBWOOFER PRE OUT
A terminal.
A terminal.
B:
Outputs the source only from the subwoofer
connected to the SUBWOOFER PRE OUT B terminal.
A+B:
Outputs the source from the subwoofers
connected to the SUBWOOFER PRE OUT A and
SUBWOOFER PRE OUT B terminals.
SUBWOOFER PRE OUT B terminals.
Not Used:
No subwoofers are used for playback.
This sub-menu allows you to configure the audio effect
and playback options when you play a source in the
Stereo listening mode.
and playback options when you play a source in the
Stereo listening mode.
a. Re-EQ/Academy
This option allows you to configure whether the Re-EQ
or Academy effect is applied or not in the Stereo
listening mode. Use these effects when you do not want
to overemphasize the treble sound. This option can also
be set for Zone 2.
or Academy effect is applied or not in the Stereo
listening mode. Use these effects when you do not want
to overemphasize the treble sound. This option can also
be set for Zone 2.
Off (Default):
The effects are not applied.
Re-EQ On:
Adjusts the soundtrack in which the treble
is overemphasized, so that the sound is optimized for
home theater.
home theater.
Academy On:
Lowers the treble level and filters the
noise when the source contains emphasized treble
sound and too much hiss, such as an old mono audio
movie recorded onto videotape.
sound and too much hiss, such as an old mono audio
movie recorded onto videotape.
b. Front Speaker
This option configures the speakers to use when playing
the source in the Stereo listening mode. Select the
speaker terminals to which the speakers you want to use
are connected. This setting can be made when the
“(Speaker B) Front L/R” is set to “Main A” in the
Speaker Configuration sub-menu.
the source in the Stereo listening mode. Select the
speaker terminals to which the speakers you want to use
are connected. This setting can be made when the
“(Speaker B) Front L/R” is set to “Main A” in the
Speaker Configuration sub-menu.
Stereo Setup Sub-menu