Справочник Пользователя для Insignia NS-R2001

Insignia NS-R2001 AM/FM Stereo Receiver

www.insigniaproducts.com

The sleep timer automatically turns the receiver off 
after a specified period of time.

To use the sleep timer:
• Press the SLEEP button to specify the amount of 

time you want the receiver to play.

Each time this button is pressed, the time 
changes as follows:

• 10  minutes
• 20  minutes
• 30  minutes
• 60  minutes
• 90  minutes
• OFF

To adjust the display brightness:
• Press the DIMMER button to specify the 

brightness of the display.

Each time this button is pressed, the brightness 
changes as follows:

• ON
• dimmer
• OFF

To clean this receiver, wipe with a soft, dry cloth. If 
the surfaces are extremely dirty, use a soft cloth 
dipped in a soap and water solution or a weak 
detergent solution.
• Never use alcohol, paint thinner, or benzine to 

clean this receiver.

• Before using a chemically treated cloth, read the 

instructions that came with the cloth carefully.

If a problem occurs, run through the table below 
before contacting Insignia.
If the problem persists, attempt to solve it by 
switching the receiver off and on again. If this fails 
to resolve the problem, contact Insignia. Under no 
circumstances should you attempt to repair the 
receiver yourself as this could void the warranty.

While operating the sleep timer, the 

 lights up.

If the display is off, pressing any button turns the 
display on.

No power

• The AC power cord is 

disconnected.

• Poor  connection  at  AC 

wall outlet or the outlet 
is inactive.

• Connect the cord securely.
• Check the outlet using a lamp or 

another appliance.

No sound

• The speaker cords are 

disconnected.

• The volume is adjusted 

too low.

• The MUTE button on the 

remote control is pressed 
to ON.

• Speakers are not 

switched on.

• Incorrect selection of the 

input source.

• Incorrect connections 

between the 
components.

• Check the speaker connections.
• Adjust  the  volume.
• Press the MUTE button to cancel 

the muting effect.

• Turn on one or both speakers.
• Select the desired input source 

correctly.

• Make connections correctly.

Stations cannot 
be received

• No antenna is connected.
• The desired station 

frequency is not tuned in.

• The antenna is in wrong 

position.

• Connect an antenna.
• Tune in the desired station 

frequency.

• Move the antenna and retry 

tuning.

Preset stations 
cannot be 
received

• An  incorrect  station 

frequency has been 
memorized.

• The memorized stations 

are cleared.

• Memorize the correct station 

frequency.

• Memorize the stations again.

Poor FM 
reception

• No antenna is connected.
• The antenna is not 

positioned for the best 
reception.

• Connect an antenna.
• Change the position of the 

antenna.

NS-R2001_10-0038_MAN_ENG.book  Page 11  Wednesday, February 3, 2010  7:36 AM