Справочник Пользователя для Crown Audio CE2000TX

For added system flexibility, Crown offers optional 
secondary output connectors, with a choice of either 
model CEAS1 barrier block (see Figure 5.5) or 
model CEAS2 5-way binding post connectors (see 
Figure 5.6). Alternate output connectors may come 
factory installed on new amplifier orders. They can 
also be added to existing CE 2000TX amplifiers by 
an authorized Crown Service Center. For more 
information, please contact Crown Technical Sup-
port.

Your CE 2000TX amplifier comes with a set of 
tamper-resistant hole plugs, which allow you to 
“protect” the level controls against unauthorized 
adjustment. To use, simply pull off the control 
knobs from the front of the amp, and slip the hole 
plugs into place (see Figure 5.7). The plugs should 
press easily into position with light force. Once in 
place, the plugs will help to avoid most accidental 
or intentional tampering (some situations may 
require additional security measures).

To remove the hole plugs, simply pry the plug away 
from the amplifier case using a small, flat-blade 
screwdriver. To help to ensure adequate security, the 
plugs have been designed to be more difficult to 
remove than to place into position. If necessary, 

additional hole plugs can be purchased separately 
from Crown’s Parts Department (Part # 103234-1).

Store your knobs in a safe location should you need 
to make level adjustments in the future.

The CE 2000TX amplifier also provides an optional 
0.775V input sensitivity setting. If you determine 
your application requires this sensitivity setting, 
please contact Crown Technical Support for more 
information.