Справочник Пользователя для Crate Amplifiers 412A

FlexWave412A/B Guitar Enclosure

The Input/Output Plate:
1. Impedance Selector Switch: Use 
this switch to select 16 ohm mono 
operation or 8 ohm stereo/4 ohm 
mono operation.
2. Out 1/4" Jack: When using the 
cabinet in the mono operating mode, 
use this jack to connect the cabinet 
to another speaker enclosure of the 
same impedance.
3. In/Left 1/4" Jack: When using 
the cabinet in the mono operating 
mode, use this jack as the cabinet’s 
input jack. Connect the output of your 
amplifier to this jack by means of the 
speaker cable provided.
When using the cabinet in the stereo 
operating mode, connect this jack to 
the left channel output of your amplifier. 
4. Right 1/4" Jack: When using the 
cabinet in the stereo operating mode, 
connect this jack to the right channel 
output of your amplifier.
When using the cabinet in the mono 
operating mode, this jack is not used.

Refer to the illustrations on the right 
for additional information.