Справочник Пользователя для ICOM IC-M501EURO

20

7

CONNECTIONS AND MAINTENANCE

An optional MB-75 

FLUSH MOUNT

is available for mounting

the transceiver to a flat surface such as an instrument panel.

KEEP the transceiver and microphone at

least 1 meter away from your vessel’s magnetic navigation
compass.

q Using the template on the last page, carefully cut a hole

into the instrument panel (or wherever you plan to mount
the controller).

w Slide the transceiver through the hole as shown below.

e Attach the 2 supplied bolts (M5 

× 8 mm) on either side of

the IC-M501EURO.

r Attach the clamps on either side of the transceiver.

• Make sure that the clamps align parallel to the transceiver body.

t Tighten the end bolts on the clamps (rotate clockwise) so

that the clamps press firmly against the inside of the in-
strument control panel.

y Tighten the locking nuts (rotate counterclockwise) so that

the transceiver is securely mounted in position as below.

u Connect the antenna and control cable, then return the in-

strument control panel to its original place.

0 IC-M501EURO_3.qxd  03.7.29 15:26  Page 20