Справочник Пользователя для Insignia NS-A2111

Welcome

www.insignia-products.com

4 To select Mono or Stereo while in FM mode, press the 

MO/ST button. When you select Stereo, the display shows a 
stereo signal. If the signal is not strong enough, you cannot select 
Stereo. 

5 Press ENTER to exit FM/AM mode and enter disc play mode.

6 Change the antenna direction to find the strongest signal for each 

station.

For your convenience, we have listed some methods to solve 
common problems you may encounter when using the system. If the 
problem occurs repeatedly, contact your nearest maintenance center.

Stereo is not available in AM mode.

In most cases, whether the DVD player can work correctly 
depends on the disc you are trying to play. Some features 
listed in the instruction manual may not work properly due to 
disc problems.

Cannot operate the system 
with the remote control

• Check the batteries in the remote control to see if 

they need to be replaced.

• Use the remote control within 6 meters from the 

system, and direct the remote control to the front 
panel of the system.

Cannot play discs

• Make sure that the disc is placed on the tray with 

the label facing up.

• Play discs compatible with the DVD player.
• Switch off the player for a while and switch on 

again.

• Parental control rating is set. Remove or change 

the rating.

No disc menu is displayed 

Check if a menu is recorded.

Play mode is different from 
what has been chosen in 
the Setup menu

If the disc has no corresponding function codes, some 
features selected in the Setup menu may not work 
properly.

Picture distortion or no color 
displayed

The TV system or video output of the system is not the 
same as the TV set. Reset the TV system.

No picture is produced or 
picture is produced 
asynchronously

The setup of the video output does not match the way 
the system is connected with the TV set. Set up and 
configure correctly.

NS-A2111.fm  Page 27  Friday, January 26, 2007  6:59 AM