Справочник Пользователя для Panasonic SC-HT65
4
RQTV0225
Standby indicator [^]
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
Standby/on switch [8]
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
When the unit is connected to the AC mains supply, this
indicator lights up in standby mode and goes out when the
unit is turned on.
Standby/on switch [8]
Press to switch the unit from on to standby mode or vice
versa. In standby mode, the unit is still consuming a small
amount of power.
Main unit
Display
[-MENU,
―SETUP, RETURN]
For entering menus to make various settings.
For returning to previous menus.
For returning to previous menus.
•
•
[TUNE, 3, 4]
For tuning the radio and selecting menu or setup items.
•
[TUNE, 3, 4]
For tuning the radio and selecting menu or setup items.
SETUP MIC jack
For calibration microphone
For calibration microphone
[kHz, MHz]
Frequency unit indicators
kHz: AM, or PCM sampling frequency
MHz: FM
[TUNED, ST, MONO]
Radio indicators
TUNED: A station is tuned
ST: A stereo FM broadcast is tuned
MONO: You have switched to monaural mode to improve
reception
Radio indicators
TUNED: A station is tuned
ST: A stereo FM broadcast is tuned
MONO: You have switched to monaural mode to improve
reception
[SLEEP]
Sleep timer indicator.
Sleep timer indicator.
[PCM, C.FOCUS]
PCM: Lights when the PCMFIX mode is set
C.FOCUS: Appears when you are using Center Focus
PCM: Lights when the PCMFIX mode is set
C.FOCUS: Appears when you are using Center Focus
[ENTER]
Used during menu or setup operations.
Used during menu or setup operations.
[RDS, PS, PTY]
Shows the current RDS display mode.
Shows the current RDS display mode.
[SFC, 2CH MIX]
SFC: Appears when you are using an SFC mode
2CH MIX: Appears when you are listening to a multi-channel
source with headphones
[VOLUME]
Volume control.
[ ] Headphone jack
Plug type: 3.5 mm stereo
Volume control.
[ ] Headphone jack
Plug type: 3.5 mm stereo
Sound does not come from the speakers if you connect
headphones.
Avoid listening for prolonged periods of time to prevent
hearing damage.
headphones.
Avoid listening for prolonged periods of time to prevent
hearing damage.
•
•
General display
Shows the input mode, radio frequency and other general
information.
Shows the input mode, radio frequency and other general
information.
[DIGITAL INPUT]
Lights when input is digital.
Lights when input is digital.
INPUT SELECTOR
TUNE
MENU
RETURN
SETUP
SETUP MIC
VOLUME
ENTER
AUTO
SPEAKER SETUP
1
2
3
4
5
2
3
4
5
6
7
7
8
9
1
2
3
4
5
6
7
8
9
Remote control signal sensor
1
2
3
4
5
6
[% DIGITAL, DTS, % PL
ΙΙ]
Lights to indicate the source's input signal and decoding
format used.
%
%
DIGITAL: Dolby Digital sources
DTS: DTS sources
%
%
PL
ΙΙ: Dolby Pro LogicΙΙ decoder is being used
7
8
[M]
Flashes or lights during presetting.
Flashes or lights during presetting.
9
[INPUT SELECTOR, <, >]
For selecting input.
For selecting input.
10
10
AUTO SPEAKER SETUP
Flashes during Auto Speaker Setup. Lights when the setup
finishes.
Flashes during Auto Speaker Setup. Lights when the setup
finishes.
10
Control guide
[W]
Lights when you are using the digital transceiver (
Lights when you are using the digital transceiver (
➡
page 7).
Flashes when there is no link between the main unit and the
wireless system
(For details, refer to the operating instructions for SH-FX65).
11
TUNED
MONO
SLEEP
PTY
PS
RDS
PCM
ST
kHz
MHz
DIGITAL DTS
PL 2CH MIX
SFC
M
C.FOCUS
DIGITAL INPUT
W
1
2
2
3
4
4
5
6
7
7
9
11
8
10
Control guide
SC-HT65 GN-En.indb 4
8/17/2007 4:19:48 PM