Справочник Пользователя для Furuno WX2-012-551

BBWX2 INSTALLATION GUIDE  

 
 
 

100

Link/Act

Status

1

2

3

4

 
Power ON 
No operation is required for the user.  Simply turn on the BBWX2’s DC power source to 
power it. 
 
Note: When the BBWX2 is used as a switch, make sure to power it before any other Network 
Devices (MFDs) 
 
BBWX2 LEDs 
The LEDs are displayed on the top surface of the unit as shown below. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Receiver LED display 
There is a single, multi-color LED that provides the status of the Receiver.  Generally, when 
the LED is GREEN – normal operation; when AMBER – anomalous but trivially fixable 
operation required; when RED – something has failed.  See the Troubleshooting section for 
more details on the LED status/conditions. 
 
Switch LED display 
There are LEDs to monitor the LAN communications on the unit.  The indicator LEDs blink or 
go off according to the equipment status as in the table shown below.  The LEDs show link 
and data rate. 
 
When the equipment is first powered-up, the power on sequence is as follows: 
 

Receiver LED:   Initially ON (Green) 
Switch LAN LEDs:  All blink once (first 100 row, then Link/Act row), then go off (when 
                                 no port activity is detected).