Справочник Пользователя для Echo CS-550P

10

1. Remove spark plug lead. (See page 25)

2. Remove two clutch cover nuts and remove clutch

cover.

3. Remove bar and saw chain if necessary. See

“Maintenance and Care” section for guide bar/
saw chain maintenance procedures.

4. Unlock the chain brake, and mount guide bar on

studs and slide toward clutch to make saw chain
installation easier. Install chain with cutters on
top of guide bar facing foward.

5. Install the clutch cover over the guide bar studs.

Ensure chain tension adjuster pin fits into the
guide bar adjuster hole. Tighten clutch cover nuts
finger tight.

Spiked bumper

Clutch cover

Brake lever
(Front hand guard)

Two nuts

Clutch

Nuts

Guide bar adjuster hole

Clutch cover

Guide bar studs

Unlock chain brake