Справочник Пользователя для Shindaiwa EB854RT

3

This engine is equipped with a heat sensor in order to prevent the engine from over-

heating. If the sensor is activated, engine speed will be reduced to 5,000 (RPM). If 

the engine speed is automatically reduced, please cool the engine as described in 

the section "Using the Blower".

WARNING!
Never operate 

power equipment of any kind if you 

are tired or if you are under the influ-

ence of alcohol, drugs, medication or 

any other substance that could affect 

your ability or judgement.

NEVER smoke or light fires near the 

unit.
ALWAYS stop the engine and allow it 

to cool before refuelling. Avoid overfill-

ing and wipe off any fuel that may have 

spilled.
ALWAYS inspect the unit for fuel leaks 

before each use. During each refill, 

check that no fuel leaks from around 

the fuel cap and/or fuel tank. 

If fuel leaks are evident, stop using the 

unit immediately. Fuel leaks must be 

repaired before using the unit. 
ALWAYS move the unit to a place well 

away from a fuel storage area or other 

readily flammable materials before 

starting the engine.
NEVER place flammable material 

close to the engine muffler.
NEVER run the engine without the 

spark arrester screen in place.

WARNING!
Never make unauthorized 

modifications or attachment instal-

lations. Never use attachments not 

approved by Shindaiwa for use on this 

unit. 

Blowers operate at a very high speed and can do serious damage or injury if they are misused or abused. Never allow a per-

You must be physically and mentally fit 

to operate this unit safely. 

ALWAYS wear eye protection that complies with ANSI Z 87.1 or your applicable national standard to shield against 

thrown objects.
NEVER run the engine indoors! Make sure there is always good ventilation. Fumes from engine exhaust can cause seri-

ous injury or death.
ALWAYS stop the unit immediately if it suddenly begins to vibrate or shake. Inspect for broken, missing or improperly 

installed parts.
ALWAYS keep the unit as clean as practical. Keep it free of loose vegetation, mud, etc.
ALWAYS keep the handles clean.
ALWAYS disconnect the spark plug wire before performing any maintenance work.
ALWAYS turn off the engine before putting the unit down. When transporting the unit in a vehicle, properly secure it to 

prevent the unit from over turning, fuel spillage and damage to the unit. 
NEVER insert any foreign objects into the air intake or outlet opening of the blower while in operation.