Справочник Пользователя для Shindaiwa 81532
4
Safety Labels
Figure 3
IMPORTANT
Safety and Operation Information
Labels: Make sure all information
labels are undamaged and readable.
Immediately replace damaged or miss-
ing information labels. New labels are
available from your local authorized
Shindaiwa dealer.
LE242
This label indicates the minimum
distance between front handle
and rear grip.
Be Aware of the Working Environment
Avoid long-term operation
in very hot or very cold
weather.
Make sure bystanders or observers
outside the 50-foot “danger zone”
wear eye protection.
Be extremely careful
of slippery terrain,
especially during rainy
weather.
Always make sure the ap-
propriate cutting attachment
shield is correctly installed.
If contact is made with a hard
object, stop the engine and
inspect the cutting attachment
for damage.
When operating in rocky terrain
or near electric wires or fences, use
extreme caution to avoid contact-
ing such items with the cutting
attachment.
Be constantly alert for objects
and debris that could be thrown
either from the rotating cutting
attachment or bounced from a
hard surface.
Reduce the risk of
bystanders being struck
by flying debris. Make
sure no one is within 50
feet (15 meters)—that’s
about 16 paces—of an
operating attachment.
Figure 2
50
FEET
50 FEET
(15m)
KEEP BYSTANDERS AWAY
AT LEAST 50 FEET (15m)
BEWARE OF THROWN OR
RICHOCHETED OBJECTS
KEEP AWAY FROM
ROTATING BLADE
Shindaiwa
READ THE
OPERATOR’S MANUAL
WEAR HEARING AND
ANSI Z87.1 APPROVED
EYE PROTECTION
P/N 19422-00046