Справочник Пользователя для DeVillbiss Air Power Company A16064

9 - ENG

A16064

NOTE:  Nozzles are color coded 
to match colored nozzles on 
panel.

7.  Place the nozzle holder onto 

the panel (located on the handle 
assembly) and push each nozzle 
holder into place.

NOTE: The pump on this unit is 
maintenance free and requires no oil, 
If there is a problem with the pump 
contact an Authorized Service Center.

gauge to check the tires pressure 
before each use and while inflating 
tires; see the tire sidewall for the 
correct tire pressure. 
NOTE: Air tanks, compressors and similar 
equipment used to inflate tires can fill 
small tires similar to these very rapidly. 
Adjust pressure regulator on air supply 
to no more than the rating of the tire 
pressure. Add air in small increments 
and frequently use the tire gauge to 
prevent over inflation.

High Pressure Pump (located inside 
the shroud): Increases the pressure 
of the water supply.
Engine: Drives the high pressure 
pump.
High Pressure Hose: Carries the 
pressurized water from the pump to 
the gun and spray wand. 

Compare the illustrations with your unit to familiarize yourself with the location 
of various controls and adjustments. Save this manual for future reference.

Spray Gun: Connects with spray 
wand to control water flow rate, 
direction, and pressure.
Quick-connect spray wand: Allows 
the user to quickly change out high-
pressure nozzles. Refer to Spray Wand 
Nozzles.
Chemical Hose (not shown): Feeds 
cleaning agents into the pump to 
mix with the water. See How To 
Apply Chemicals/Cleaning Solvents 
instructions in this section.