Справочник Пользователя для Invacare 6418

For more information regarding Invacare products, parts, and services,

please visit www.invacare.com

Deluxe Overbed Table

Model Nos. 6417, 6418

NOTE: Check ALL parts for shipping damage. If shipping damage is noted, DO NOT use. Contact
Carrier/Dealer for further instruction.

Safety Summary

To ensure the safe and proper installation of the deluxe overbed table, these instructions
MUST

be followed:

WARNING

DO NOT use this product or any available optional equipment without first

completely reading and understanding these instructions and any additional

instructional material such as owner’s manuals, service manuals or instruction

sheets supplied with this product or optional equipment. If you are unable to

understand the warnings, cautions or instructions, contact a healthcare

professional, dealer or technical personnel before attempting to use this equipment

- otherwise, injury or damage may occur.
ALWAYS check the overbed table for proper tightness before using.
The Deluxe Overbed Table has a weight limitation of 25 lbs.

ACCESSORIES WARNING

Invacare products are specifically designed and manufactured for use in conjunction

with Invacare accessories. Accessories designed by other manufacturers have not

been tested by Invacare and are not recommended for use with Invacare products.

INSTALLATION WARNING

After any adjustments, repair or service and before use, make sure that all attaching

component parts are secure.

Assembling the Overbed Table - Model 6417

NOTE: For this procedure, refer to FIGURE 1 on page 2.

1. Invert the top board and place on floor.

2. Install the mast onto the top board with six mounting screws. Tighten securely.

3. Attach the base above the mast with the two bolts, washers, and inserts.

4. Install the four casters into the four holes provided in the base.

5. Flip the overbed table back to the upright position.

Assembly, Installation and Operating Instructions

SAVE THESE INSTRUCTIONS