Справочник Пользователя для Tekkeon MP1580

USER GUIDE  

3. Plug the USB plug on the opposite end of the input/output cord into a USB port on a 

computer or a USB power adapter (such as Tekkeon’s myCharger, MP1650). The charging 
lamp will light as follows to indicate the battery status:

  Red On   

Batteries are charging

  Green On 

Batteries are fully charged

  Red Flashing 

Batteries are not usable, or are not rechargeable

  Green Flashing 

No battery is installed, or batteries are installed incorrectly

  If the lamp is flashing, ensure that the batteries are installed correctly, or replace the 

batteries with good, rechargeable batteries.

4. When the charging lamp turns green (in approximately 3 hours for two batteries or 6 hours 

for four batteries), the batteries are fully charged. Unplug the input/output cord from both 
TekCharge MP1580 and the computer or charger.