Справочник Пользователя для Panasonic DP-C405
72
Chapter 2 More Menus Features
Image Repeat
Create multiple images on a sheet from a single original.
z
Dotted lines can be printed between each of the copied images. Refer to Copier Settings in the Operating
Instructions (For Function Parameters) of provided CD-ROM.
Instructions (For Function Parameters) of provided CD-ROM.
z
This function can be selected when the original is placed on the Platen Glass.
z
As the original is placed on the Platen Glass, the position of the original may be erroneously detected if
influenced by ambient light.
influenced by ambient light.
z
If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
image may be unclear.
1
Open the ADF more than 45 degrees,
and place original on the Platen Glass,
and then leave the ADF open.
and place original on the Platen Glass,
and then leave the ADF open.
z
Refer to Placing Originals (Copy) in the
Operating Instructions (For Basic
Operations) of provided booklet.
Operating Instructions (For Basic
Operations) of provided booklet.
2
Press the Copy key if the machine is
set to other function mode.
set to other function mode.
3
Select “More Menus”.
4
Select “Zoom / Effects”, and then
select “Image Repeat”.
select “Image Repeat”.
5
Select the desired type of paper, and
then select “OK”.
then select “OK”.
6
Enter the desired number of copies.
7
Press the Start key.
z
After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.
return to the initial screen of the currently active
mode.
The minimum size of the
original is 20 mm x 20 mm.
original is 20 mm x 20 mm.