Справочник Пользователя для Toshiba e-STUDIO230/280
62
2.HOW TO MAKE COPIES
6.BYPASS COPYING (Cont.)
2
Bypass Copying on Standard Size Paper
1
Place paper on the bypass tray, and then
align the guides with the size of the paper.
align the guides with the size of the paper.
- When adjusting the width of the side guide, while holding down
the knob of the side guide, slide the side guide.
- “Ready for bypass feeding” appears.
- Acceptable paper type for bypass copy "Acceptable Copy Paper
- Acceptable paper type for bypass copy "Acceptable Copy Paper
- Place the paper with the side to be copied facing down.
- If you put several sheets on the bypass tray at a time, fan the
- If you put several sheets on the bypass tray at a time, fan the
paper well before placing it.
- Place the paper so as not to exceed the line indicated on the
guides.
- Do not push the paper forcibly into the entrance of bypass
feeding. It may cause a paper jam.
- Draw the triple paper holder depending on the paper size.
- Raise (B) before placing A3/LD size or larger.
- Raise (B) before placing A3/LD size or larger.
2
Place the original(s).
3
Press the button that represents the size
of the paper that has been set for A3, A4,
B4 and B5.
of the paper that has been set for A3, A4,
B4 and B5.
When the paper size is not specified, the copying speed may be
lower due to the cleaning operation inside the copier.
lower due to the cleaning operation inside the copier.
(B)