Справочник Пользователя для Insignia NS-20EM50A13

NS-20EM50A13

 

20” Widescreen LED Monitor

www.insigniaproducts.com

5 You may need to set the resolution and refresh 

rate on both computers (example: 1600 x 900 @ 
60 Hz).

1 Connect the power cord to both monitors, then 

to properly grounded AC outlets.

2 Make sure that both monitors and the computer 

are turned OFF. Connect VGA cables to the VGA 
output jacks on the computer, then to the VGA 
input jack on each monitor.

OR

Connect DVI cables to the DVI output jacks on 
the computer, then to the DVI input jack on 
each monitor.

OR

Use a VGA cable connection between one 
monitor and the computer, and a DVI cable 
connection between the other monitor and the 
computer.

3 Turn ON your computer and monitors. The 

monitor's blue power LED turns ON.

4 You will need to choose if you would like your 

screen to be a duplication of the other monitor 
or and extension. 

1 Click the Start button, then select Control 

Panel.

2 Under Appearance and Personalization, click 

Display.

3 Click Adjust screen resolution on the left of the 

screen.

4 Click Advanced Setting.

5 Click the Monitor tab, then click the drop-down 

list under Screen refresh rate and select your 
desired refresh rate.

6 Click OK.

7 Click OK to exit out of the Display Settings 

window

1 Click the Start button and select Control Panel.

2 Click Appearance and Personalization, then 

click Personalization.

3 Click Display Settings.

4 Click the Advanced Setting button.

5 Click the Monitor tab, then click the drop-down 

list under Screen refresh rate and select your 
desired refresh rate.

6 Click OK.

7 Click OK to close the Display Settings window.

1 Right-click on your desktop, then select 

Properties.

2 Click the Settings tab at the top of the window.

3 Click the Advanced button.

4 Click the Monitor tab, then click the drop-down 

list under Screen refresh rate and select your 
desired refresh rate.

5 Click OK.

6 Click OK to close the Display Settings window.

1 Open the Apple menu, then select System 

Preferences.

2 Click Displays under Hardware, then click 

Display.

3 Click the drop-down list beside Refresh Rate, 

then select your desired refresh rate.

For more information, refer to the User Manual that 
came with your computer or your graphics card.

My picture is not filling the screen. I have black 
bars around my picture.
This is due to the aspect ratio. Different sources and 
software programs may be presented in different 
aspect ratios. Try changing the appearance of the 
screen…(cross-reference to Manual Image Adjust 
section of the manual.)

The image is out of focus.
You may need to adjust your resolution. (Add 
cross-reference to adjusting resolution section of 
the manual).

1 Right-click on your desktop, then click Screen 

resolution.

2 Click the Multiple displays dropdown and 

select Extend these displays.

3 Click OK.

4 Click Keep to use the extended display, or click 

Revert to go back to the previous setting.

1 Right-click on your desktop, then click 

Personalize.

2 Click Display Settings. 

3 Click the large dropdown menu choose 2. 

(Default Monitor), then click the Extend the 
desktop to this monitor check box.

4 Drag the monitor icons to match the way you 

have your monitors setup on your desk.

5 Click OK.

6 Click Yes to use the extended display, or click No 

to go back to the previous setting.

If your PC has an HDMI output, you can use an HDMI 
to DVI cable (not included).

You may also need to set the resolution and refresh 
rate on both computers (example: 1600 x 900 @ 
60 Hz).

To be sure which monitor is 1 or 2 click the Identify 
Monitors button.

NS-20EM50A13_12-0349_MAN_V1_EN.book  Page 4  Wednesday, July 18, 2012  11:38 AM