Справочник Пользователя для AMD 250
210
Optimizing with SIMD Instructions
Chapter 9
25112
Rev. 3.06
September 2005
Software Optimization Guide for AMD64 Processors
9.10
EMMS and FEMMS Usage
Optimization
Use FEMMS or EMMS to clean up the register file between an x87 instruction and a following
MMX, 3DNow!, or Enhanced 3DNow! instruction or vice versa.
MMX, 3DNow!, or Enhanced 3DNow! instruction or vice versa.
Application
This optimization applies to:
•
32-bit software
•
64-bit software
Rationale
Use either the FEMMS or the EMMS instruction when switching between the x87 floating-point unit
and MMX, 3DNow!, or Enhanced 3DNow! instructions. The FEMMS instruction is aliased to the
EMMS instruction on AMD Athlon 64 and AMD Opteron processors. Both instructions convert to an
internal NOP instruction in AMD Athlon 64 and AMD Opteron processors. The FEMMS instruction
is provided to help ensure that code written for previous generations of AMD processors runs
correctly.
and MMX, 3DNow!, or Enhanced 3DNow! instructions. The FEMMS instruction is aliased to the
EMMS instruction on AMD Athlon 64 and AMD Opteron processors. Both instructions convert to an
internal NOP instruction in AMD Athlon 64 and AMD Opteron processors. The FEMMS instruction
is provided to help ensure that code written for previous generations of AMD processors runs
correctly.
There is no penalty for switching between the x87 floating-point instructions and 3DNow! (or MMX)
instructions in the processor. The MMX, 3DNow!, and Enhanced 3DNow! instructions are designed
to be used concurrently; therefore, no delimiting cleanup operations are required when switching
between them. However, x87 and 3DNow!/Enhanced 3DNow!/MMX instructions share the same
architectural registers, so there is no easy way to use them concurrently without cleaning up the
register file in between by using FEMMS or EMMS. For more information, see AMD64 Architecture
Programmer’s Manual Volume 1: Application Programming, order# 24592.
instructions in the processor. The MMX, 3DNow!, and Enhanced 3DNow! instructions are designed
to be used concurrently; therefore, no delimiting cleanup operations are required when switching
between them. However, x87 and 3DNow!/Enhanced 3DNow!/MMX instructions share the same
architectural registers, so there is no easy way to use them concurrently without cleaning up the
register file in between by using FEMMS or EMMS. For more information, see AMD64 Architecture
Programmer’s Manual Volume 1: Application Programming, order# 24592.