Справочник Пользователя для Q-Logic 4 0 5 2 C
9
To unload the driver, perform the following steps:
1.
Login to the Solaris system as root.
2.
Type the following command:
pkgrm QLA4xxx-0
3.
Type the following command to reboot the system:
reboot -- -r
Step 4. Install the SANsurfer iSCSI HBA Manager Application
To install the SANsurfer iSCSI HBA Manager application:
1.
Insert the applicable SANsurfer for SANblade iSCSI HBAs CD into your CD-ROM drive (if the auto-run
screen does not appear, open the start_here html page with your browser.)
screen does not appear, open the start_here html page with your browser.)
2.
Select your operating system.
3.
Click I Accept on the License Agreement.
4.
Click to select the specific version of your operating system.
5.
Select the SANsurfer iSCSI HBA Manager install file.
6.
Follow the on-screen directions and installation prompts.
Congratulations! You have successfully installed your QLogic Host Bus
Adapter and management application!
Adapter and management application!
❑
To obtain the most current drivers, management applications, user instructions, and documentation, please
visit the QLogic website at
visit the QLogic website at
www.qlogic.com/support
and download the latest versions.
❑
The following section contains additional information about the SANblade QLogic host bus adapter, including
the LED scheme, troubleshooting, warranty, technical support and certification information.
the LED scheme, troubleshooting, warranty, technical support and certification information.
Host Bus Adapter LEDs
lists the LED configuration for the QLogic QLA4050 host bus adapter.
lists the LED configuration for the QLogic QLA4050C/4052C and QLE4060C/4062C host bus adapters.
Table 1. QLogic QLA4050 Host Bus Adapter LED Scheme
Green LED
Activity
●
Link established
Table 2. QLogic QLA4050C/4052C and QLE4060C/4062C Host Bus Adapter
LED Scheme
Green LED
Activity
●
Link established
Flashing
Receive/transmit activity