Справочник Пользователя для Connect Tech Titan/cPCI

 

Revision 1.01  

 

9 

 

 

To install your Titan/cPCI or Rear I/O adapter in your computer follow these steps: 

1.  Turn off the power to your computer.  
2.  Remove the Titan from its packaging, and remove the protective rubber from the alignment 

pins on the Titan’s front panel. 

3.  Insert your Titan/cPCI into an available front 3U slot or insert your Titan/cPCI Rear I/O 

adapter into an available rear 3U slot. The black handle on the front panel should be on the 
bottom, in the lowered position. 

4.  Push the Titan into the cPCI slot until the handle mates with the card cage. Lift the handle to 

lock the Titan into place. 

5.  With a screwdriver, fasten the screw on the top of the panel into the card cage for added 

mechanical security. 

 

Your Titan/cPCI and Rear I/O adapters are very sensitive to static 
electricity.  Make sure you wear an anti-static wristband before you 
remove the card from the anti-static shipping bag.  When you remove 
the board from the anti-static bag, handle it only by the edges and 
place it on the anti-static bag or an anti-static mat.