Справочник Пользователя для Enterasys Networks 2E253

To configure the switch for VLAN operation, proceed as follows:

Access Local Management as described in 

.

Perform all required initial setup operations. 

Navigate to the 802.1Q VLAN Configuration Menu screen to begin the VLAN configuration 
process for the switch.

To select screens to assign switched network ports to static VLANs, define new VLANs, and 
configure port filtering according to a VLAN list. Network users can be logically grouped into 
VLANs even if they span long physical distances over a vast, intricate physical network. 

The VLAN Local Management menu items listed on the 802.1Q VLAN Configuration Menu 
screen allow such VLANs to be configured on a network at the switched port of the SmartSwitch 
device. Each port mode of operation can also be configured to handle untagged frames (Hybrid 
Mode), tagged frames (1Q Trunk Mode), or frames of a legacy 802.1D switch fabric (1D Trunk 
Mode). Also, some or all of the ports on the switch can be configured as GVRP ports, which 
enables dynamic VLAN registration. This keeps the traffic associated with a particular VLAN and 
protocol to be isolated from the other parts of the network.

NOTE: There is a global setting for GVRP that is enabled by default. Refer to 

 

for more information.