Справочник Пользователя для Enterasys Networks 2E253

You can also access Local Management using a Telnet connection through one of the network 
ports of the SmartSwitch device.

There are six types of screens used in Local Management: password, menu, statistics, 
configuration, status, and warning screens. Each type of screen can consist of one to five basic 
elements, or fields. 

 shows an example of the fields in a screen. A description of each 

field follows the figure.

NOTE: For details on the setup parameters for the console, how to connect a console 
to the SmartSwitch, or how to make a telnet connection, refer to 

Firmware Revision:      XX.XX.XX

General Configuration

30691_01

BOOTPROM Revision: XX.XX.XX

MAC Address:
IP Address:
Subnet Mask:
Default Gateway:
TFTP Gateway IP Addr:

Device Date:
Device Time:
Screen Refresh Time:
Screen Lockout Time:

Clear NVRAM       [NO]

Device Uptime  XX D  XX H  XX M

Device Type: xxxxx-xx

IP Fragmentation  [ENABLED]

Operational Mode:  [802.1Q SWITCHING]

Event Message Field

Display Field

Input Fields

Selection Field

Command Fields

Display Fields

xxxxx-xx  LOCAL MANAGEMENT

Event Message Line

00-00-ID-00-00-00
0.0.0.0
255.255.0.0
NONE DEFINED
0.0.0.0

See

Note

Note: This shows the location of the cut away that is used in most of the screen graphics

in this document. The top portion of the screen is cut away to eliminate repeating the same

information in each graphic.The screen title is contained in its figure title.