Справочник Пользователя для Q-Logic 3000

Скачать
Страница из 120
B–Flash Update
QLogic Adapter Flash Update—Windows Server
NE0154601-00  B
B-3
3.
Format the USB Flash device to a FAT file system (if required):
a.
Right-click the Start button, and then click Explore.
b.
Right-click the USB Flash drive, and then click Format
c.
Format the USB Flash drive to a FAT file system.
4.
Unzip the NX Live USB file into its own directory.
a.
Right-click the file, click Open With, and then click Compressed 
(zipped) Folders
b.
Copy the two folders boot and slax onto the USB Flash drive.
5.
Click the Start button, and then click Run.
6.
Type cmd in the Open: box, and then click OK.
7.
Change to the drive letter assigned for the USB Flash drive, for example:
C:\Documents and Settings>F:
8.
Change the directory to the boot folder on the USB Flash drive.
9.
Execute the bootinst.bat file. Press the ENTER key twice to complete 
the process of making the USB Flash drive bootable.
10. Insert the NX Live USB Flash drive into the server with the QLogic adapter.
11.
Change any BIOS settings to permit the USB Flash drive to boot before the 
other devices on the system.
12. Use the menu options (see 
) to show current board 
information, update the firmware, or reboot the system (remember to 
remove the NX Live USB if you need to revert back to the OS on the hard 
disk).
NX Live Menu Options
Here is an example of the NX Live menu options:
NX Live Firmware Update
Menu Options:
1. Show adapter information
2. Update to latest firmware on adapter
3. Reboot system if firmware has been updated
Enter here:
QLogic Adapter Flash Update—Windows Server
This section provides information on how to perform a Flash update in Windows 
Server 2003, 2008, and 2008 R2. Note that the QLogic adapter is shipped with a 
default Flash version.