Справочник Пользователя для Q-Logic 3000
7–Windows Server 2003, 2008, and 2008 R2 Driver Configuration
NIC Driver Properties and Configuration
NE0154601-00 B
7-3
The Advanced tab displays the driver properties.
describes the Advanced tab selections.
Table 7-1. Advanced Properties Parameters
Parameter
Description
Completion Queue Size
This parameter indicates the size of the completion
queue.
queue.
Registry Key: CompletionQueueSize
Default: 4 (16,384 entries).
Values (entries): 0 (1024), 1 (2048), 2 (4096),
3 (8192), 4 (16,384), 5 (32,768)
3 (8192), 4 (16,384), 5 (32,768)
Flow Control
This parameter sets flow control parameters. There
are four flow control options: 0 (off), 1 (transmit),
2 (receive), and 3 (transmit/receive).
are four flow control options: 0 (off), 1 (transmit),
2 (receive), and 3 (transmit/receive).
Registry Key: FlowControl
Default: 3 (Transmit and receive flow control
enabled.)
enabled.)
Values: 0, 1, 2, 3
Health Monitoring
This parameter maintains the health of the device.
Disabling this parameter should performed under
advisement from QLogic.
Disabling this parameter should performed under
advisement from QLogic.
Registry Key: Watchdog
Default: Health monitoring enabled.
Values: Enabled/Disabled
Interrupt Moderation
This parameter provides interrupt moderation. When
this parameter is enabled, interrupts are moderated
automatically based on traffic patterns.
this parameter is enabled, interrupts are moderated
automatically based on traffic patterns.
Registry Key: InterruptModeration
Default: Disabled
Values: Enabled/Disabled
IPv4 Checksum Offload
This parameter enables/disables the IPv4 checksum
offload. There are four flow checksum options: 0 (off),
1 (transmit), 2 (receive), and 3 (transmit/receive).
offload. There are four flow checksum options: 0 (off),
1 (transmit), 2 (receive), and 3 (transmit/receive).
Registry Key: IPChecksumOffloadv4
Default: 3 (Transmit and receive checksum
enabled)
enabled)
Values: 0, 1, 2, 3