Справочник Пользователя для Q-Logic 2300 series

2 – QCP2330/2332

FCode

CF2351102-00  F

2-7

Q

The new connection mode displays. For example:

Calculating NVRAM checksum, please wait... 

Current HBA connection mode: 0 - Loop Only

Possible connection mode choices:

0 - Loop Only

1 - Point-to-point only

2 - Loop preferred, otherwise point-to-point

When the QCP2330/2332 HBA is currently operating in loop mode (through 
connection mode 0 or connection mode 2), perform the following steps to view its 
loop ID and change it if necessary:

1. To view the loop ID, type the show-adapter-loopid command. 

ok show-adapter-loopid

The loop ID displays. For example:

Adapter loopid - 7c

2. If the loop ID is not correct, change it using the set-adapter-loopid command. 

For example:

ok 0 set-adapter-loopid

The new loop ID displays. For example:

Adapter loopid - 0

Perform the following steps to select a Fibre Channel device that is attached to the 
QCP2330/2332 HBA as the boot device:

1. Use the show-devs command to display the device tree for all devices attached 

to the machine.

ok show-devs

The device tree displays. The QCP2330/2332 HBAs with FCode are referenced 
with QLGC,qla@. For example:

ok show-devs

.

.

/pci@1f,0/pci@1/QLGC,qla@4