Справочник Пользователя для Q-Logic 2300 series

4 – QSB2340/2342
FCode

4-4

CF2351102-00  F

Q

Perform the following steps to view the current QSB2340/2342 HBA connection 
mode and change it if necessary:

1. Perform 

 in 

2. To view the current connection mode, type the show-connection-mode 

command. 

ok show-connection-mode 

The connection mode and options display. For example:

Current HBA connection mode: 2 - Point-to-point only

Possible connection mode choices:

0 - Loop Only

1 - Point-to-point only

2 - Loop preferred, otherwise point-to-point

3. If the connection mode is not correct based on the devices connected to the 

QSB2340/2342 HBA, change it using the set-connection-mode command. 
For example:

ok 0 set-connection-mode

The new connection mode displays. For example:

Calculating NVRAM checksum, please wait... 

Current HBA connection mode: 0 - Loop Only

Possible connection mode choices:

0 - Loop Only

1 - Point-to-point only

2 - Loop preferred, otherwise point-to-point

When the QSB2340/2342 HBA is currently operating in loop mode (through 
connection mode 0 or connection mode 2), perform the following steps to view its 
loop ID and change it if necessary.

1. Perform 

 in 

2. To view the loop ID, type the show-adapter-loopid command. 

ok show-adapter-loopid

The loop ID displays. For example:

Adapter loopid - 7c