Справочник Пользователя для Mitsubishi Electronics 13JW55
6 - 8
6.2 Forced I/O Assignment by Parameter Settings
1) Double-click "Parameter" in the project list.
2) "PLC Parameter", the "Network Parameter"
folder, and "Remote Password" are
displayed. Double-click the "PLC
Parameter".
3) The Q Parameter Setting dialog box is
displayed. Click the "I/O Assignment" tab.
4) Select "Input" from the list box of the "Type"
column.
5) Enter "QX42" in the "Model Name" column.
6) Select "32Points" from the list box of "Points"
column.
7) Enter "0000" in the "Start XY" column.
8) After the setting is completed, click the
End button.
3) Click!
4) Select!
5) Enter "QX42"!
6) Select!
8) Click!
2) Double-click!
1) Double-click!
7) Enter "0000"!
After this exercise is finished, initialize the
settings by the following procedure.
1) Click the Default button in the Q
Parameter Setting dialog box to initialize the
parameter settings.
2) Click
on the toolbar and write only the
parameters to the CPU.