Справочник Пользователя для Enterasys Networks 1G58x-09
SNMP Command Set
Configuring SNMP Target Addresses
5-44
5.2.6.2
set snmp targetaddr
Use this command to set an SNMP target address configuration. The target address is a unique
identifier and a specific IP address that will receive SNMP notification messages. This address
configuration can be linked to optional SNMP transmit parameters (such as timeout, retry count,
and UDP port).
identifier and a specific IP address that will receive SNMP notification messages. This address
configuration can be linked to optional SNMP transmit parameters (such as timeout, retry count,
and UDP port).
set snmp targetaddr targetaddr param param ipaddress ipaddr [port udpport]
[timeout timeout] [retries retries] [volatile | nonvolatile] [taglist tagname]
[timeout timeout] [retries retries] [volatile | nonvolatile] [taglist tagname]
Parameters
Entry in the snmpTargetParamsTable.
Storage type
Whether entry is stored in volatile, nonvolatile or
read-only memory.
read-only memory.
Row status
Status of this entry: active, notInService, or
notReady.
notReady.
Table 5-10
show snmp targetaddr Output Details (Continued)
Output
What It Displays...