Справочник Пользователя для Enterasys Networks 1G58x-09
Logging and Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
11-62
Command Mode
Read-Write.
Example
This example shows how to enable SNTP in broadcast mode:
11.2.4.3 set sntp broadcastdelay
Use this command to set the SNTP time to wait for a response from an SNTP server, in
milliseconds, when in broadcast mode.
milliseconds, when in broadcast mode.
set sntp broadcastdelay time
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the SNTP broadcast delay to 12000 milliseconds
:
11.2.4.4 set sntp poll-interval
Use this command to set the SNTP poll interval in seconds. This is the time between SNTP requests
when operation in broadcast or unicast mode.
when operation in broadcast or unicast mode.
set sntp poll-interval interval
Matrix>set sntp broadcast
time Specifies
broadcast delay time in milliseconds. Valid
values are 1 to 999999. Default value is 3000.
Matrix>set sntp broadcastdelay 12000