Справочник Пользователя для Enterasys Networks 1G58x-09

This example shows how to display the status of the MAC locking autostatic function. In this case, 
public ingress and egress VLANs, and the public MAC address has not been set, and the autostatic 
and public VLAN autolearn functions are in their default state of disabled:

Use this command to enable or disable the MAC locking autostatic function, which allows 
addresses learned through dynamic MAC locking to automatically be configured as static 
addresses. The static address count (as described in 

) will be used to determine 

when to lock the port. When the MAC locking autostatic function is enabled on a port, the address 
will not be allowed to move to another port. If the autostatic function is not enabled, static MAC 
locking can still be applied to multiple ports to “scope” valid ports for a particular MAC address. 
Once enabled the autostatic function is enabled, the dynamic address count will be disregarded 
unless it is zero. If it is zero, the port will be locked and no further address learning will be allowed.

set maclock autostatic port-string [enable | disable]

Matrix>show maclock autostatic 

The public ingress vlan is : 0

The public egress vlan is : 0

The autostatic public MAC Address is 00:00:00:00:00:00

The autostatic pass through MAC Address is 01:00:5e:00:00:05

Port AutoStatic ISL AutoLearn

------------------------------------

fe.0.1 disabled disabled

fe.0.2 disabled disabled

fe.0.3 disabled disabled

fe.0.4 disabled disabled

--More--