Справочник Пользователя для Enterasys Networks 3000
Using Web Management
RoamAbout Access Point 3000 Hardware Installation Guide 3-5
Using Web Management
To use the Web interface to minimally configure the access point, perform the following steps:
1.
Open a Web browser and enter the access point’s IP address in the address field:
–
If your access point uses a DHCP assigned IP address, make sure the access point is
connected to your network and enter the DHCP assigned IP address in your browser’s
address field (use your DHCP server or other utility to determine the access point’s IP
address).
connected to your network and enter the DHCP assigned IP address in your browser’s
address field (use your DHCP server or other utility to determine the access point’s IP
address).
–
If your access point uses a static IP address, connect a system to the access point’s Ethernet
port and enter the default IP address: http://192.168.1.1/ in your browser’s address field.
port and enter the default IP address: http://192.168.1.1/ in your browser’s address field.
The access point’s Login window appears.
2.
Enter the username admin and the password password and click LOGIN (for more
information about the username and password, refer to Refer to the RoamAbout Access Point
3000 Configuration Guide for advanced configuration information.
information about the username and password, refer to Refer to the RoamAbout Access Point
3000 Configuration Guide for advanced configuration information.
.
The Country Code page appears.